10000VA Inverter

Designed to last

10KVA Inverter

Highlights

  1. Full bridge configuration based on IGBT half bridge module
  2. Short circuit protection for mains and inverter both
  3. DSP based intelligent control
  4. IGBT based static change over – no relay change over
  5. LCD based display for user-friendly display of parameters and status
  6. Protection against overload
  7. Buzzer indication for battery low, overload, short circuit etc. System continues normally if the error is corrected.
  8. Four line LCD
  9. Priority solar charging
  10. No load shutdown and load restart for energy saving
  11. Cutoff and auto restart with permanent cut after 5 consecutive cut offs.
  12. SMPS type four stage charging with full charge cutoff and trickle charging.
  13. Self powered driver module with built-in isolated supply simplifies the design and reduces component count.
  14. 20 KHz switching frequency resulting in silent operation. No audible noise.
  15. Pure sine wave output
  16. Ideal for mixed load.
  17. Inverter/UPS selection switch, micro switch or ordinary switch selectable.
  18. Protection against accidental output feedback disconnection.
  19. Indigenous design with proven technology

SPECIFICATION

POWER RATING : 10000 VA
CONTROL DEVICE : DIGITAL SIGNAL PROCESSING
POWER DEVICES : MOSFETS/IGBT
INPUT BATTERY VOLTAGE : 48-192VDC
OUTPUT VOLTAGE : 220 V +/-1% AC SETTABLE
OUTPUT FREQUENCY : 50 Hz +/-1%
OUTPUT WAVE SHAPE : SINOSOIDAL
OUTPUT T.H.D : < 2 % with resistive load
MAINS CHARGING : PWM
MAINS CHARGING CURRENT : SETTABLE 15A MAX
MAINS CHARGING VOLTAGE : 140 – 270 V AC
MAINS TO INVERTER & INVERTER TO MAINS CHANGE – OVER        : RELAY BASED CHANGE OVER
SOLAR CHARGING PRIORITY : YES
BATTERY LOW LEVEL : SETTABLE
BATTERY FULL CHARGE CUT OFF LEVEL : SETTABLE
OVERLOAD PROTECTION : FOLDBACK CURRENT LIMITING
SHORT CIRCUIT PROTECTION : TRIP AFTER 3 SEC
SHORT. CIRCUIT RESTART : AUTO AFTER 15 SECS (5 TIMES)
OVER LOAD : 112 % FOR 10 SECS.
OVER LOAD RESTART : AUTOMATIC ( 5 TIMES )
DISPLAY : LCD 1, 2 or 4 lines settable
ALARMS FOR FAULTY CONDITIONS : SHORT CIRCUIT, OVERLOAD, BATTERY LOW
SETUP : THROUGH MENU-DRIVEN SETUP